Fresh-water stratified storage tank
| FSS-1W 825 item no. 500865 | FSS-1W 1000 item no. 500866 |
The fresh water storage tanks FSS-1W 825 and FSS-1W 1000 are characterized by their ideal design - slim and high. This way, a very good temperature layering can be guaranteed. Both storage tanks are made of steel and are equipped with an internal bare tube heat exchanger in the lower section of the storage tank and an internal stainless steel corrugated pipe.
The drinking water runs through the stainless steel corrugated pipe and then is preheated in the lower section of the storage tank. Due to the balanced amount of fresh water, a high output capacity and service water hygiene to an extremely high degree can be guaranteed. The slim design of this storage tank is specifically made for solar backup heating. Due to the internal temperature layering system, the cooled down water runs back into the storage tank at the exact required level. This prevents turbulences within the internal layering. The particulary good heat insulation is reached by a 100 mm strong, highly heat insulating soft foam sheathing and a synthetic leather covering.
The sheathing is delivered seperately, which enables an unproblematic transportation to the designated location and an easy mounting of the system.
Consumption temperature at 45°
| Type FSS-1W 825 | Type FSS-1W 1000 | |
| Solar heat exchanger | ||
| Surface | 2,11 m² | 2,11 m² |
| Capacity | 13 l | 13 l |
| Tapping performance | ||
| 10 [l/min] | 330 l | 360 l |
| 20 [l/min] | 260 l | 280 l |
| 30 [l/min] | 110 l | 130 l |
Storage tank dimensions and technical details:
| Model |
Capacity
in liters
|
Nominal
power rate |
Permitted
operating overpressure
Boiler in bar
|
Permitted operating overpressure buffer in bar |
Outernhalt diameter
Insulation in Liter |
High incl.
Insulation in mm |
Weight
kg |
Tilted height
in mm |
|
| FSS-1W 825 |
750 | 1,7 | 6 | 3 | 790 | 950 | 1.860 | 218 | 1.900 |
| FSS-1W 1000 | 1.000 | 2,1 | 6 | 3 | 790 | 1.000 | 2.110 | 260 | 2.145 |
