Sloped roof mounting set

Mounting material for the fitting and connecting of the solar absorbers on a sloped roof.

Mounting-set for 1 absorber:
3 x L-hook
3 x Plastic-mounting rail
3 x Counter sunk screw, hex nut and washer
6 x Spax screw
2 x Clamp ring with o-ring seal

Mounting-set for 4 absorbers:
12 x L-hook
12 x Plastikc-mounting rail
12 x Counter sunk screw, hex nut and washer
24 x Spax screw
6 x Clamp ring with o-ring seal

Pumps

If you have a bigger solar absorber system or your filter pump is too low, you have to install a second pump. For such situations we offer you our filter pumps Aqua.

An additional larger pump for solar absorber system:

Aqua 450 Power output: 250 W Voltage: 230 V Current: 2 A Max. pressure: 2,5 bar Max. water temperature: 60 °C Length: 475 mm Height: 301 mm Weight: 6,4 kg Connection: 11/2" Rotation speed: 2850 1/min Protection class: IP 55

Aqua 650 Power output: 370 W Voltage: 230 V Current: 3 A Max. pressure: 2,5 bar Max. water temperature: 60 °C Length: 475 mm Height: 301 mm Weight: 6,7 kg Connection: 11/2" Rotation speed: 2850 1/min Protection class: IP 55

Valves & Controllers

To assure the hydraulic connection of the absorbers to the existing swimming pool we offer different kinds of switching valves. They are equipped with DN 40 nipples for PVC-pipe connection.

Solar-Control-Vent 2 is an electric 2-way-valve equipped with a sensor and controller:

Technical details
connection: DN 40
voltage: 230V 50/60 Hz
max. pressure: 3 bar
max. water temperature: 60°C
manipulating time: 12 sec.
protection class: IP 54

Manuel ball cock DN 40 for SUNSET swimming pool systems

Connect-Fix-Set

For the fitting and the connection of the SUNSET complete solar absorber systems.

Connect-Fix-Set:

2 x PVC-pipe connection
1 x End cap
1 x Nipple DN 32 ¾“
1 x T-fitting DN 50
1 x Automatic ventilation system
2 x Clamp ring incl.  o-ring gasket
1 x Reducer DN 40/32
1 x 90° bend I/I ¾“